Product features:
Cold extrusion press system is a kind of flexible connection designed according to construction site. It is an easy operated method to connect rebar, there is no need to precast rebar in factory.
The cold extrusion press coupler is extruded on rebar ends with the pressure of high pressure device. The test result of this kind of connection can guarantee the tensile strength of connection specimen is no less than 125% of the normal yield strength of rebar. (rebar grade: 500MPa)
Cold extrusion press system is butt-to-butt connection which is suitable for applications that have both tension and compression requirements.
Advantages:
1. Suitable for repair or reform projects
2. Suitable for any rebar ends which are cold cut
3. No reducing the cross section area of rebar
4. All couplers have individual marks and batch numbers, so it is easy to trace raw materials. Totally produced in accordance with ISO 9001 standard.
Installation guide
1. Site preparation work: clean and straighten rebar.
2. Mark on rebar half length of the coupler.
3. Put the coupler in the gauge length to limit the extrusion area, and then mark on both ends of cold extrusion press coupler.
4. We can’t extrude coupler outside the marking area after marking. We should extrude the coupler from middle to both sides.
5. Prepare hydraulic tools and install the corresponding pressure moulds. Prepare pump to connect power. If the motor is 380V or 440V, please rotate the switch to correct motor first.
6. Insert half length of the coupler onto rebar, connect according to indicating mark.
7. Extrude coupler with required pressure.
8. Stop extruding when it reaches the pressure value of specified size.
9. The process above is repeated many times according to each size requirements.
10. Prepare as many rebar end as need to connect.
11. Insert the rebar need to connect into the coupler extruded on the first rebar.
12. Repeat the extrusion process on the connecting rebar.
First, prepare coupler Second, put the rebar into coupler
Third, extrude the coupler onto rebar, then put into the second rebar
Fourth, complete the screwless connection
The strength of cold extrusion press connection is no less than rebar normal strength in tensile tests. It can also do the ultimate mechanical tests which can break on bar outside the connection according to client’s requests.
The parameter of cold extrusion press coupler
Size(mm) | 16 | 18 | 20 | 22 | 25 | 28 | 32 | 36 | 40 |
Outer Dia.(mm) | 30 | 34 | 36 | 40 | 45 | 50 | 56 | 63 | 70 |
Length(mm) | 130 | 130 | 140 | 132 | 150 | 168 | 192 | 216 | 240 |
Net weight(kg) | 0.375 | 0.52 | 0.51 | 0.7 | 1.02 | 1.365 | 2.005 | 2.85 | 4 |
Application projects
Our products can applied to bridge rebar splice, Nuclear power engineering rebar splice, Seawater desalination rebar connection, LNG project rebar splice, Metro rebar connection, High tower rebar connection, Viaduct rebar connection and etc.
Machine matched with cold extrusion press coupler
JB-650 can process rebar dia. from 16mm to 32mm JB-800 can process rebar dia. from 36mm to 40mm
JBCZ International department customer service
Mailbox: jb@jbcz.com
We have American rebar connection, Chile rebar connection, Columbia rebar connection, Egypt rebar connection, UAE rebar connection, Australia rebar connection, Qatar rebar connection, Mexico rebar connection, ACI-318 Rebar coupler, AC-133 coupler, ICC-ES rebar coupler, type 2 rebar coupler, AC-133 coupler cyclic test, ACI-318 mechanical splice, American standard cyclic test rebar coupler, UK CARES rebar couplers, TA1-A test rebar coupler, TA1-B test rebar coupler, AFCAB rebar coupler, ISO15835 rebar coupler, Bartec coupler, DCL approved rebar coupler, Slip test rebar coupler and etc.
Any rebar connection problem , please feel free to contact us.
中文
English
Español
Português
عربى
